Printable View
My sister had a new roof put on 25 ish years ago and it looks like whoever did it, did not use real slate they used some sort of 'fake' slate and the covering / paint on the slate is now starting to peel off. Anyone had experience of painting the tiles rather than doing a full on new roof replacement ?
I got the fake slates on my bay window. Just got the handyman to paint them with sealer.Here's hoping.
Composite roof tiles. Over time they do start peeling, the veneer weathers off. They're cheap but effective. The likelihood is that whoever did the roof removed hundreds of Welsh Slate, sold them for £1,50 each, then bought the composite for around a £1 each. As for painting the tiles, never seen that, sorry, although if something like that does exist and it lasts a good few years then it would be much cheaper than replacing the tiles, Batten, Felt etc. (obviously)Quote:
Originally Posted by pipster
Roof tiles can be painted wether they are original or fakeQuote:
Originally Posted by pipster
I would suggest using a strong primer from the zinser brand
You need to scrape off the flaking , peeling stuff then apply a coat of the primer which is a water based product but is the real deal when it comes to a base for top coats
It can be tinted so if your slates are going to be a mid red, you can add the appropriate colour so you don't have to do coat after coat of your chosen finish
The zinser primer dries very quickly ....if it looks patchy consider putting two coats on before your top coat .......
Make sure that top coat is suitable and not cheap crap as your roof really takes the sun and rain and this is a job you want to last
As I said it's intensive work and may cost you several grand
This should be your base coatQuote:
Originally Posted by SLUDGE FACTORY
You can apply it by brush or sprayer
https://www.rawlinspaints.com/produc...eye-1-2-3.html
And this or something similar , your top coatQuote:
Originally Posted by SLUDGE FACTORY
https://premiumpaints.co.uk/products...multiple-sizes
You want this sort of paint as it's flexible , traditional oil paint is rigid and the heat of the summer then cold winter and rain will cause it to flake off in no time
I've used Zinsser paint before - so will suggest she uses that - or at least see if any trades she gets in suggest using it.
The zinsser I used previously was self priming and internal only - so it only needed one coat as it totally blanked out the previous colour.
Thanks all for your thoughts.
You can use just one coat of zinsser if you like and only 1 topcoat but for outside work and for it to look good you would probably need twoQuote:
Originally Posted by pipster
The first coat of the zinser would be the primer, the second coat would provide a decent bonding surface for the top coat to adhere , or stick to
One coat of zinsser , one coat of top coat ? ......well it MIGHT look OK but you want it to last
That's what a decent tradesman would suggest and if I wasn't replacing the tiles and wanted a decent finish and not cut corners or try to do a cheap job that's the proper process