combi boiler

[jeepster]

Does it eventually warm up again? Or does it stay cold?

It does get hot then cold again

After it gets cold, does it get hot again.

B 2 B.

then cold

What make is it.?

Valliant i think?

Is it showing a fault code./

No i dont think so.

Stop thinking and fecking look.

i have been trying to find the booklet,from memory does it show F followed by numbers?If so no it does not Maxim.

Yes f and a number in the little window.Do you know what model it is. ?

In her infenate wisdom the Mrs has put the booklet safe she cant remember where

It must have the model number on the boiler.

http://www.vaillantservice.co.uk/Identify_Your_Vaillant_Boil er_Model_Ecotec_Turbomax_Ecomax_VCW_VUW.html

Maxim there is no fault showing,its getting like play school what window will i look at next

[Maxim]

Does it eventually warm up again? Or does it stay cold?

It does get hot then cold again

After it gets cold, does it get hot again.

B 2 B.

then cold

What make is it.?

Valliant i think?

Is it showing a fault code./

No i dont think so.

Stop thinking and fecking look.

i have been trying to find the booklet,from memory does it show F followed by numbers?If so no it does not Maxim.

Yes f and a number in the little window.Do you know what model it is. ?

In her infenate wisdom the Mrs has put the booklet safe she cant remember where

It must have the model number on the boiler.

http://www.vaillantservice.co.uk/Identify_Your_Vaillant_Boil er_Model_Ecotec_Turbomax_Ecomax_VCW_VUW.html

Maxim its no6 the first one.

Pay your gas bill.

[jeepster]

Does it eventually warm up again? Or does it stay cold?

It does get hot then cold again

After it gets cold, does it get hot again.

B 2 B.

then cold

What make is it.?

Valliant i think?

Is it showing a fault code./

No i dont think so.

Stop thinking and fecking look.

i have been trying to find the booklet,from memory does it show F followed by numbers?If so no it does not Maxim.

Yes f and a number in the little window.Do you know what model it is. ?

In her infenate wisdom the Mrs has put the booklet safe she cant remember where

It must have the model number on the boiler.

http://www.vaillantservice.co.uk/Identify_Your_Vaillant_Boil er_Model_Ecotec_Turbomax_Ecomax_VCW_VUW.html

Maxim its no6 the first one.

Does it give a fualt code in the little window,if you not sure get a grown up to help you.

cheeky bastar*,thanx for your time and help

[Fatty Føggøn]

Does it eventually warm up again? Or does it stay cold?

It does get hot then cold again

After it gets cold, does it get hot again.

B 2 B.

then cold

What make is it.?

Valliant i think?

Is it showing a fault code./

No i dont think so.

Stop thinking and fecking look.

i have been trying to find the booklet,from memory does it show F followed by numbers?If so no it does not Maxim.

Yes f and a number in the little window.Do you know what model it is. ?

In her infenate wisdom the Mrs has put the booklet safe she cant remember where

It must have the model number on the boiler.

http://www.vaillantservice.co.uk/Identify_Your_Vaillant_Boil er_Model_Ecotec_Turbomax_Ecomax_VCW_VUW.html

Maxim its no6 the first one.

You need Floella Benjamin.

[BLUETIT]

Does it eventually warm up again? Or does it stay cold?

It does get hot then cold again

After it gets cold, does it get hot again.

B 2 B.

then cold

What make is it.?

Valliant i think?

Is it showing a fault code./

No i dont think so.

Stop thinking and fecking look.

i have been trying to find the booklet,from memory does it show F followed by numbers?If so no it does not Maxim.

Yes f and a number in the little window.Do you know what model it is. ?

In her infenate wisdom the Mrs has put the booklet safe she cant remember where

It must have the model number on the boiler.

http://www.vaillantservice.co.uk/Identify_Your_Vaillant_Boil er_Model_Ecotec_Turbomax_Ecomax_VCW_VUW.html

Maxim its no6 the first one.

Does it give a fualt code in the little window,if you not sure get a grown up to help you.

B 2 B.

[welshden]

The water runs hot then cold no radiators on help please.

Do your radiators get warm at all. I had a problem once where the radiators were on but the water was running hot then cold. It turned out that the shower mixer was broke and the cold water was backflowing throrough the hot water in the mixer and shutting off boiler. This can happen with any faulty mixers.

[jeepster]

The water runs hot then cold no radiators on help please.

Do your radiators get warm at all. I had a problem once where the radiators were on but the water was running hot then cold. It turned out that the shower mixer was broke and the cold water was backflowing throrough the hot water in the mixer and shutting off boiler. This can happen with any faulty mixers.

Radiators are all working fine.

[welshden]

The water runs hot then cold no radiators on help please.

Do your radiators get warm at all. I had a problem once where the radiators were on but the water was running hot then cold. It turned out that the shower mixer was broke and the cold water was backflowing throrough the hot water in the mixer and shutting off boiler. This can happen with any faulty mixers.

Radiators are all working fine.

So if the radiators are fine do you have any mixer taps in the house or showers with a thermosatic valve. All my cold water pipes to taps or shower have quarter turn isolating valves so I turned them all off on the cold side on mixer taps or shower then tried the hot water and all was ok. I then turned each one of the isolating valves back on one at a time and trying the hot water, I eventually worked out which mixer tap was allowing the cold to flow back to the hot pipes and shutting the boiler off. If you find that by isolating a particular mixing tap the problem goes then you can either change the mixer tap or put a non return valve in the cold supply to the mixer tap giving problem.

[jeepster]

The water runs hot then cold no radiators on help please.

Do your radiators get warm at all. I had a problem once where the radiators were on but the water was running hot then cold. It turned out that the shower mixer was broke and the cold water was backflowing throrough the hot water in the mixer and shutting off boiler. This can happen with any faulty mixers.

Radiators are all working fine.

So if the radiators are fine do you have any mixer taps in the house or showers with a thermosatic valve. All my cold water pipes to taps or shower have quarter turn isolating valves so I turned them all off on the cold side on mixer taps or shower then tried the hot water and all was ok. I then turned each one of the isolating valves back on one at a time and trying the hot water, I eventually worked out which mixer tap was allowing the cold to flow back to the hot pipes and shutting the boiler off. If you find that by isolating a particular mixing tap the problem goes then you can either change the mixer tap or put a non return valve in the cold supply to the mixer tap giving problem.

Cheers will try this.

[welshden]

The water runs hot then cold no radiators on help please.

Do your radiators get warm at all. I had a problem once where the radiators were on but the water was running hot then cold. It turned out that the shower mixer was broke and the cold water was backflowing throrough the hot water in the mixer and shutting off boiler. This can happen with any faulty mixers.

Radiators are all working fine.

So if the radiators are fine do you have any mixer taps in the house or showers with a thermosatic valve. All my cold water pipes to taps or shower have quarter turn isolating valves so I turned them all off on the cold side on mixer taps or shower then tried the hot water and all was ok. I then turned each one of the isolating valves back on one at a time and trying the hot water, I eventually worked out which mixer tap was allowing the cold to flow back to the hot pipes and shutting the boiler off. If you find that by isolating a particular mixing tap the problem goes then you can either change the mixer tap or put a non return valve in the cold supply to the mixer tap giving problem.

Sorry forgot to mention, a quick way to check if you do have a backflow of cold water through the hot water is to disconnect the hot water out pipe from the boiler and if there is water continually coming from the house side of the pipe then it is more than likely cold water coming through a broken mixer or shower valve.

[welshden]

The water runs hot then cold no radiators on help please.

Do your radiators get warm at all. I had a problem once where the radiators were on but the water was running hot then cold. It turned out that the shower mixer was broke and the cold water was backflowing throrough the hot water in the mixer and shutting off boiler. This can happen with any faulty mixers.

Radiators are all working fine.

So if the radiators are fine do you have any mixer taps in the house or showers with a thermosatic valve. All my cold water pipes to taps or shower have quarter turn isolating valves so I turned them all off on the cold side on mixer taps or shower then tried the hot water and all was ok. I then turned each one of the isolating valves back on one at a time and trying the hot water, I eventually worked out which mixer tap was allowing the cold to flow back to the hot pipes and shutting the boiler off. If you find that by isolating a particular mixing tap the problem goes then you can either change the mixer tap or put a non return valve in the cold supply to the mixer tap giving problem.

Sorry forgot to mention, a quick way to check if you do have a backflow of cold water through the hot water is to disconnect the hot water out pipe from the boiler and if there is water continually coming from the house side of the pipe then it is more than likely cold water coming through a broken mixer or shower valve.

Hi Jeepster if you find out it is a mixing tap causing the problem put a non return valve in anyway as it stops the problem happening again if the mixer goes faulty in future and also the non return valve goes on the hot side not cold as I previously mentioned, sorry typo error. The aim is to stop the cold flowing into the hot side.